We are the distributors for rain water harvesting fittings and accessories of M/s Prince Aqua Systems.

These highly advanced systems are designed for efficient draining of rain water. Most useful in construction such as sheds, warehouses, mills, factories, hotels, airports, houses, bungalows etc. where ever sloping roofs are provided.

All the extruded pipes, fittings and accessories available in 140 mm, 180 mm and 250 mm sizes are manufactured from high quality UV .stabilised plastic and will last a very long time

RUNNING OUTLET
To provide an outlet for water anywhere along the length of roof water pipe line which is connected to the down line pipe.

CLAMP
To ensure perfect fixing between pipe and fittings.

90^oELBOW(without outlet)
To change the direction of roof water pipe line through 90^o,normally at the corners.

PIPE CLIP(75,110 & 160 mm)
To provide support and ensure proper fixing of down line pipe on the wall.

90^oELBOW(with outlet)
To change the direction of roof water pipe line through 90^o,and also provide an outlet for water which is connected with down line pipe.

ROOF WATER PIPES
To collect the water from the roof and convey to the down line pipes.Available in 3mtrs. length.

SHORT STOP END
To close the end of roof water pipe line.

DOWN LINE PIPE
(75,110 & 160mm)
To convey the water collected in roof water pipe line to ground level.Available in 3mtr. length with one end socketed.

STOP END OUTLET
To close the end of roof water pipe line and also provide an outlet for water, which is connected to the down line pipe.

RAFTER BRACKETS
(TOP/SIDE)
To support the complete roof water pipe line with rafters.Available for top and side supports.

SUPPORT BRACKET
To support pipes and fittings wherever necessary and strengthen the roof water pipe line.

RUBBER GASKET
To provide leak proof joints.

TOP BRACKET
To locate the support bracket and rafter bracket together and ensure proper connection between them.

RUBBER SEALS
To ensure,leakproof joint of single socket elbow.