We are the distributors for rain water
harvesting fittings and accessories of M/s Prince
Aqua Systems.
These highly advanced systems are
designed for efficient draining of rain water. Most useful
in construction such as sheds, warehouses, mills,
factories, hotels, airports, houses, bungalows etc. where
ever sloping roofs are provided.
All the
extruded pipes, fittings and accessories available in 140
mm, 180 mm and 250 mm sizes are manufactured from high
quality UV stabilised plastic and will last a very long
time.
Applications
These
highly advanced systems are designed for efficient
draining of roof water. Most useful in the constructions
such as Sheds/Warehouses, Mills/Factories, Hotels,
Airports, Bus/Railway Stations, Village Houses, Bunglows
etc. where sloping roofs are provided.
JOINT BRACKET To
connect two lengths of roof water.
SINGLE SOCKET ELBOW (75,110&160mm) To
join the roof water outlet with down line pipe.
RUNNING OUTLET To
provide an outlet for water anywhere along the length
of roof water pipe line which is connected to the down
line pipe.
CLAMP To ensure perfect
fixing between pipe and fittings.
90oELBOW(without
outlet) To change the direction of roof water
pipe line through 90o,normally at the
corners.
PIPE CLIP(75,110 & 160 mm) To
provide support and ensure proper fixing of down line
pipe on the wall.
90oELBOW(with
outlet) To change the direction of roof water
pipe line through 90o,and also provide an
outlet for water which is connected with down line
pipe.
ROOF WATER PIPES To
collect the water from the roof and convey to the down
line pipes.Available in 3mtrs. length.
SHORT STOP END To close
the end of roof water pipe line.
DOWN LINE PIPE (75,110 &
160mm) To convey the water collected in roof
water pipe line to ground level.Available in 3mtr.
length with one end socketed.
STOP END OUTLET To
close the end of roof water pipe line and also provide
an outlet for water, which is connected to the down
line pipe.
RAFTER BRACKETS (TOP/SIDE) To
support the complete roof water pipe line with
rafters.Available for top and side supports.
SUPPORT BRACKET To
support pipes and fittings wherever necessary and
strengthen the roof water pipe line.
RUBBER GASKET To
provide leak proof joints.
TOP BRACKET To locate
the support bracket and rafter bracket together and
ensure proper connection between them.
RUBBER SEALS To
ensure,leakproof joint of single socket elbow.
