HOME
ABOUT US
PRODUCTS
CONTACT US
 
Literoof Asphaltic Roofing Sheet
Lexan Polycarbonate Corrugated Sheet
Rexalon Polycarbonate Sheet
Julite Brand Solid & Hollow Poly Carbonate Sheet
Asbalon Ultra Strong Polycarbonate Roofing Sheet
Asbalon Fibre Glass Shingles
Fujiroof
Metecno Sandwich Panels
Multi-Roof Upvc 3 Ply
Co-Extruded Roof Sheet




Multi-Roof UPVC tri-ply co-extruded heat insulation corrosionproof sheet is made from high quality PVC colophony with ultraviolet absorbent,antioxidant and modifier,which make it great resistance to fungas and humidity.It is recyciable,long lasting colour.Multi-Roof UPVC sheets offer a good choice for modern roofing system.

The physical properties of PVC colophony has been modified by adding various kinds of auxiliary agents.Sheets will have excellent pressure resistance and bending strengthm, also impact proof etc.There're many real site practices show that Multi-rof UPVC sheet cannot only ensure its quality and construction safety in normal or mild weather,but also in typhoon areas.

Multi-Roof has vacuum foamed macro molecular material between 2 layers of UPVC.This gives heat insulation.Its characteristic of heat transferring is 0.325 w/mk,one third of clay sheet,one fifth of 10mm thick cement sheet,1/2000 of colour steel sheet.It's great heat insulation in roof system without any other insulation materials together.Our test resport shown our UPVC sheet can help temperature indoor lower upto 5-8 degrees.

Multi-Roof tri-ply co-extruded UPVC Sheet is easy to drill,saw and shape, vailable proportion is upto 95%.

Sepcial cocophony and formula is used during the manufacture of Multi-Roof UPVC sheet.So it's Acid-proof & Alkali-proof in acid,alkali of salty environments.Multi-Roof UPVC sheets offer a good choice for modern roofing system.It's the best solution for polluted, salty or humid conditions and areas,excellent anti-corrosion capacity for chemical, ceramics and electroplating factory.

Multi-Roof UPVC Sheet is fire retardant and the fire protection performance rating is B1 flame-retardant level in building materials.



No.
Test Items Standard Requirements Units Test Results Judgments
1 Tensile-strength -------- Mpa 25.84 Detected Result
2 Bending Property (bending flexivity) -------- mm 0.53 Detected Result
3 Impact Property -------- ----- No aperture or crack Detected Result
4 Density -------- G/cm3 1.5955 Detected Result
5 Exterior condition -------- ----- Smoothing surface,even thickness and Unanimous colours,no crack,aperture Scorch bubble,obvious pock or strange-Colour mark. Detected Result
6 Absorting capacity -------- % 0.08 Detected Result
7 Power of grasping bolt -------- N 2410 Detected Result
8

Chemical
Resistance
Acetic acid (ratio by volume) -------- ---- No Perpetual corrosion or distortion Detected Result
Ethanol (ratio by volume) -------- ---- No Perpetual corrosion or distortion Detected Result
Methylene blue (ratio by weight) -------- ---- No Perpetual corrosion or distortion Detected Result
NaOH (ratio by weight) -------- ---- No Perpetual corrosion or distortion Detected Result
Saturated NaCI -------- ---- No Perpetual corrosion or distortion Detected Result
9 Heat resistance -------- ---- No distartion,no stick Detected Result
10 Cold resistance -------- ---- No distartion,no stick Detected Result



Project Demonstration







Plywoods & BoardsRoofingShadenet UV Stabilised Agro FilmWater Proofing Membrane
PVC Solid BoardsTarpaulinCoir Geo TextilesTomato Cloche CoverRain Water HarvestingBio-degradable Pots
Portable Hose for GardenRadiant & Vapour BarrierTurbine VentilatorBonsai ToolsBonsai Pots